The MU-X is one of the highest-volume SUVs in Thailand, and most versions leave the factory with a manual tailgate. It is also, for many owners, a working vehicle: loaded with stock, tools or family luggage several times a day.
That combination makes "can I convert it" a practical question rather than a cosmetic one. This page states what our data covers, what has to be confirmed for your specific vehicle, and the questions worth asking before you commit.
What the question actually is
An MU-X tailgate is big, and on some versions it carries weight on the door itself — a spare wheel mount, a heavy interior trim panel, or both. Owners researching a power tailgate usually have three concerns:
- Will the struts be strong enough for a heavier-than-average tailgate?
- Will it interfere with the spare wheel or anything mounted on the door?
- Will it survive frequent use on a car that works for a living?
A kit sold on "fits MU-X" alone does not answer any of these.
Which generations we cover
Our program data lists the MU-X under two year ranges:
| Program entry | Year range in our data |
|---|---|
| Isuzu MU-X | 2017–2020 |
| Isuzu MU-X | 2021+ |
Two limits worth stating plainly:
The data is recorded under the model's Chinese-market name (MUX / 牧游侠). The MU-X is sold across Southeast Asia, and year splits and trim levels vary by market. A generation change that lands in one year in one market may land differently in another.
The trim matters more on this vehicle than on most. A tailgate with a spare wheel mount is a different load case from a bare tailgate. The struts that suit one are not automatically right for the other.
So: we likely cover your generation, and the strut selection depends on your actual tailgate — which we confirm before quoting rather than assume.
How we handle the load question
This is where a lot of kits get it wrong, so it is worth being specific about our process rather than quoting a number.
We do not publish a single "supports up to X kg" figure, for two reasons: we have not completed that test across every variant, and the number would be misleading on a door whose weight changes with trim and mounted accessories.
What we do instead:
- Ask for a photo of the open tailgate, including anything mounted on it.
- Match the strut specification to the actual configuration, not to the generic model.
- Confirm in writing which strut spec the order will ship with.
If your MU-X carries a factory spare wheel on the door, say so at the start — it changes the selection.
What changes after installation
A conversion on a vehicle like the MU-X is not finished on installation day. Two things determine whether it stays right:
The gate alignment. A tailgate carrying weight has less margin for misalignment than a bare one. If the struts are fitted at the wrong angle, the gate will still open, but it will sit slightly off over months of use, and the latch will start working harder. That is why the mounting brackets are model-specific rather than generic plates.
The latch engagement. A soft-close latch pulls the gate in and holds it. On a heavy gate, if the latch is not the correct variant for that model (upper versus lower), the gate can close but not seat fully — which reads as "the tailgate rattles" six months later.
Neither is a defect of the product category. Both are the reasons a configured kit costs more than a box of universal parts.
What the kit is, and what it is not
For a covered program, the kit is a configured set: dual-motor struts, a control module programmed to the vehicle, a plug-and-play harness, a soft-close latch, switches and brackets.
What we deliberately do not claim:
- No load or IP figures we have not finished testing. If a number is not published on the kit page, it is because we cannot yet document it.
- Not identical to a factory option. It is a configured aftermarket system, designed to behave the same in normal use.
- We do not decide your warranty position. We tell you what the installation touches; your dealer decides the rest.
If the only problem is a worn strut and the electric system is otherwise fine, replacing the strut alone is usually the cheaper route — see OE replacement struts for how we match by part reference.
Questions to ask any supplier, including us
Keep these. They work on anyone:
- My tailgate carries a spare wheel — what strut spec are you shipping for that? A supplier who has not asked this has not thought about it.
- Which program covers my exact year and variant?
- Is the module programmed for my vehicle or universal?
- What is the full item list in the box? Ask for it in writing.
- If a strut fails under frequent use, can it be replaced alone?
For a vehicle that works daily, question five is the one that decides the total cost of ownership, not the purchase price.
What to do next
Send the model year, the variant, and a photo of the open tailgate showing anything mounted on it. We will confirm the program, the strut specification for your configuration, and quote it in writing.
- Intelligent Power Liftgate Kit — specifications and full item list
- Vehicle program list — models and year ranges in our data
- OE replacement struts — if you only need the strut replaced
- Installation checklist — what a correct install involves